Various lubricating base oils are charged into
blending vessel through flow indicator cum controller
in fixed proportions depending on finished product
desired. This is then dehydrated at atmospheric
pressure followed by addition of various additives.
Subsequently the blended product is filtered
through centrifugal filter which retains any
particle of size above 2 micron. This may then
be filled in packs varying from ½ lit
to 210 lit.
Since the process involved is that
of mixing hence losses are minimal, yields being
about 99%.
Thermic Fluid Heater
Air Compressor
Cooling Tower
Blending vessel with heating coil/jacket
duly insulated.
Dissolution vessel similar to above for
making polymer solution.
Charging pump with motor provided with
suction stainer.
Circulation pump with motor provided
with suction strainer.
Barrel filling arrangement with conveyor.
Automatic /semiautomatic filling machine
for filling drum's / tins.
Basket / bag type filter with heating
jacket.
Screw pump with motor for charging polymer
solution.
Dehydration 
Since the process involved is that
of mixing hence losses are minimal, yields being
about 99%. 
